Dhuni International

Description- 

1. Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if you're not around.

2. For detailed machine instructions, please refer to the manual for parameter settings.

3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.

4. Do not touch the laser with your hands, otherwise, you may burn your hands.

5. Please avoid a strong impact on the machine.

6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision.

7. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

Highlights

Automatically Controlled Air Assist System
The S30 series is equipped with an air-assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts.

Built-in High-Pressure Air Assist Nozzle
S30 series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate 30L/min high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist.

Ultra-thin 10W Laser
Adopting ultra-thin laser shaping technology, the laser focus of S30 is as thin as hairs and very powerful for engraving or cutting. The S30 Pro 10W laser is suitable for frequent cutting, doing everything faster.

Replaceable Protective Lens
S30 series laser adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power.

Expandable Engraving Area
The original engraving area is about 410x400mm, while it features XY-axis expandable design, so you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade up to 935x905mm engraving area, which can help you better handle large area engraving or cutting work.

Upgraded 32-bit Air-assist Motherboard

Features:


1. 90W effect laser beam shaping technology: S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel, this is almost beyond the effect of 90W CO2 laser.
2. Fast focusing design: S9 has the fastest focus design. The S9 laser combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing. This makes it very easy to use the laser .
3. Solid and easy-assembly structure design: The full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole structure is designed for easy-assembly, and the assembly can be completed in 10-20 minutes. The structural frame is very durable and remains open to upgrade. During use, you can keep the frame and replace with other new lasers. Or replace longer metal beams to expand the engraving area.
4. New eye protection design: The laser filter cover filters 98% of the ultraviolet light to the eyes. You and the people around you can watch laser engraving without wearing goggles. At the same time it can prevent animals from catching the laser spot.
5. Wide compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, MAC system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, AI, G-code, NC, BMP, etc.
6. Safe design: The machine is equipped with a very convenient power switch, which is not available in others. Fixing holes are reserved on the four feet and the body structure to facilitate fixing the machine and the data cable.
7. A4 steel pad: The free A4 size steel pad can protect the table from laser damage. Isolate fire hazards.
8.Square measuring ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 410x420mm large-area engraving interval can meet your various engraving needs.

Description- 

This system is perfect for hobbyists and small businesses working with wood, acrylic, leather, PCB, coated metals, ceramics, and stone. The S30 Pro Max hits an excellent balance of power, precision, and expandability, making it suitable for both detailed engraving and moderate cutting tasks.

• Durable & reliable:

  Sculpfun units last longer, have fewer issues, and are just made better.

• Upgrade-friendly & modular:
  Easy replacement of lenses and availability of spare parts is a highlight .

• Some reported issues:
  A user with 20 W S30 Pro Max noted power drop (~50% after 500 h) and limited customer support response Another noted occasional belt alignment problems that were easily fixed .

Description- 

1. Replaceable protective lens: S30 Ultra series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very cheap and can be easily purchased from SCULPFUN.

2. Built-in high-pressure air-assisted nozzle: S30 Ultra series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.

3. Upgraded 32-bit air-assisted motherboard: the latest 32-bit motherboard supports automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.

4. Industrial-grade cutting precision: S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.

5. Detachable laser eye shield: S30 series is equipped with a detachable glass eye shield, which will not be dazzling even if you don't wear glasses. Plus you can easily disassemble it if you don't need it.

6. Solid and durable frame: The S30 series is made of high-strength aluminum alloy, and its frame can withstand a weight of up to 50KG without damage, which is very durable. The frame can be used for a long time and maintain high precision, when the machine needs to be upgraded, only the latest laser needs to be upgraded.

Main Features :

 

1. Powerful high-speed air assist: S10 is equipped with a high-speed air assist nozzle. The difference of this nozzle is that it has an advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the S10 spray airflow faster. For example, when using 30L/min, 0.03Mpa air compressor, the S10 nozzle will spray high-speed airflow up to 14.5m/s. This will greatly improve the cutting penetration and cutting efficiency.

2 .Ultra-thin high density 10W laser beam shaping technology: The S10 laser output power is increased to 10W, which is twice that of the S9. But S10 obtains the same ultra-thin laser beam with 0.08mm focus as S9 , which means S10 has higher energy density, stronger cutting penetration and engraving capabilities.

3. Faster, stronger, cleaner: Combining advanced high-speed air assist and 10W high density laser, S10 shows comparable to industrial-grade wood cutting performance: First, the cutting efficiency is greatly improved, cut faster; Second, the cutting penetration is stronger, and many high-density woods can be cut; Third, the cutting surface is cleaner, the powerful airflow blows away the residue, so that there is no stain on the surface of the cutting object.

4. Industrial-grade cutting accuracy: S10 adopts industrial high-precision linear slide rail X-axis, which makes it get industrial-grade engraving accuracy. When comparing the small engraving details, S10 does not have the wave lines that other ordinary engraving machines appear.

5. More advanced and upgradable 32-bit motherboard: The S10 motherboard uses 32-bit chips, with faster computing speed, and it still reserves Z-axis and limit switch functions to facilitate people to upgrade the engraving machine. It still perfectly supports laser cutting software like Lightburn and LaserGRBL.

6. Expandable engraving area: S10 keeps Y-axis expandable design like S9, the original engraving area is about 385x385mm, but you can buy S10 Y-axis extension kit to expand the engraving area to 410X940mm, which can help you get 230% of the engraving area at a very low price. This can help you better to deal with large-area engraving or cutting work.

7. Adjustable laser eye shield: The S10 laser is equipped with a detachable eye shield, which will not dazzle even without glasses. And if you don't need it, you can easily disassemble the eye shield.

8. Safe design: There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency. The all-metal body makes the machine very sturdy and durable.

9. A4 steel pad: The free A4 size steel pad can protect the table from laser damage. Isolate fire hazards.

10. Square measuring ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 385x385mm large-area engraving interval can meet your various engraving needs.

S9 Pro 10 W

Specifications

• Laser power: 10 W diode, with ultra-fine 0.06 mm focal spot via beam-shaping tech

• Wavelength: 450 ± 5 nm (blue laser)

• Engraving area: 400 × 410 mm (~16 × 16 in)

• Cutting capacity:

• Wood: up to 15 mm (some sources suggest 20 mm with multi-pass)

• Acrylic: up to 10 mm

Precision & Mechanics

• Engraving accuracy: 0.01 mm

• Fixed-focus design: Includes sliding mechanism and focus poka-yoke for quick adjustment

• Frame: Full-metal anodized aluminum, modular, easy assembly (~10–20 min), expandable to ~935×900 mm

Safety Features

• Laser cover: Filters ~98% of UV light; allows safe viewing without goggles

• Power switch: Dual-safety power switch and pre-drilled holes for secure mounting

• A4 steel pad: Included to protect surfaces and reduce fire risk

• Measuring scales: X/Y rulers for quick alignment

Software & Compatibility

• Software: Compatible with LaserGRBL, LightBurn, Benbox, GrblController, LiteFire (Windows/macOS)

• Supported formats: JPG, PNG, DXF, SVG, AI, G-code, NC, BMP, etc.

• Connectivity: USB data cable; PWM control compatible

Power & Physical Specs

• Power supply: Universal AC input 100–240 V → output 12 V 5 A

• Net weight: ~3.0 kg

• ; Package weight: ~4.4–4.8 kg

• Packed dimensions: ~615 × 360 × 130 mm

 

Included in the Box

• Gantry and guide shafts

• Control box and support feet

• 10 W laser module

• 12 V 5 A power adapter and AC cord

• USB cable

• Assembly tools (screwdrivers, Allen keys, nuts, belts, tie wraps, brush)

• Laser goggles, 3 mm + 10 mm test wood pieces

• A4 steel desktop pad for safety

Product model SCULPFUN S30 Ultra-22W

Diode laser output power 22W (note that this is light energy not electrical energy)

Laser focus 0.08x0.10mm

Laser wavelength 455±5nm

Focusing method fixed focus column + sliding device

Laser protective cover Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield.

Motion Accuracy 0.1mm

Engraving area size standard version is 600x600mm

Machine electric power about 114W

Air pump type main board controlled air pump, voltage 24V, flow rate 30L/min

Air hose inner diameter 7.5mm

Motherboard 32-bit air-assisted motherboard, supports Bluetooth wireless connection.

Carving materials all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, stone, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramics, dark stone

Cutting materials all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo chips, leather, some plastic boards, PCB boards

Operating software LightBurn (with air assist function M8), LaserGRBL, LightBurn, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other picture formats.

Data transmission method USB connection or Bluetooth wireless connection

Power input 24V 5A

Package weight 9.9kg

Packing size 865*247*235mm

Certification CE FCC RoHS FDA ICE certification

External Size 800*840mm (Include the Motherboard Shell and X-axis Gantry Beam)

,750*800mm（Beam Frame） ,750*800mm（Beam Frame）

Internal Size 700*760mm (Inner Frame Size),600*600mm (Working Area)

Height 80mm（Beam Frame）, 220mm（Include X-axis Gantry Beam）

Note Due to manual measurement, please allow some variations.

Note that the S30 Ultra Series is not compatible with any of the extension kit available.

Description- 

1. 100% pre-assembled, plug and play: the machine is 100% installed in the package, equipped with an adapter cable, and only needs to be connected to the Y-axis wiring of the laser engraving machine to engrave Cylindrical objects, such as pens, water bottle, etc.
2. Huge engraving space and 4 raising feet: SCULPFUN roller base design is lower and stable, and equipped with 4 sturdy metal raising feet, so that it has a larger engraving diameter of 6-150mm, which can meet more engravings. need. Metal feet are more solid than plastic feet, and the machine is more stable when engraving.
3. Sliding space adjustment: SCULPFUN roller adjusts the size of the space between the two rubber rollers by sliding, and fixes the rolloer by handscrew, which is simpler and faster than the traditional multi-stage fivxing hole adjustment.
4. 100% original scale high-precision engraving: SCULPFUN roller adopts high friction 70A rubber shaft to prevent slipping, and the linear speed of the rotating surface has been precisely calculated. Directly plug in the engraving machine cable to engrave the original image in 100% original scale. Does not enlarge or reduce the image.