Dhuni International

S10 10W

Specification

Product Model SCULPFUN S10

Diode laser output power 10W (note this is light energy not electrical energy)

Inner diameter of air pipe 7.5mm,recommended to use 30L/min, 0.03Mpa air compressor, out diameter of nozzle 8mm

Laser wavelength 455±5nm

Engraving accuracy 0.01mm

Engraving area size 410*400mm

Focusing method fixed focus + sliding device

Laser protection cover Equipped with a detachable laser cover to protect the eyes. You can adjust it up and down, or remove the cover.

Machine power consumption about 36W (not related to engraving or cutting performance, just power consumption)

Engraving material all kinds of wood (including walnut, cherry and other high density wood), MDF,bamboo, cardboard, plastic, leather, PCB board, alumina, 304 stainless steel, ceramic, dark stone

Cutting material all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic, cardboard, bamboo, some plastic boards, leather,PCB boards

Laser software LaserGRBL, LightBurn, LaserGRBL, LightBurn,support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.

Data transfer method USB connection

Power input 100-240V AC50/60HZ

Output 12V 5A

Product weight 3.42kg

Packing weight 5.13kg

Packing size 600*345*130mm

Certification CE FCC RoHS FDA ICE certification

S30 Pro Max: 20W

Specification

Product Model SCULPFUN S30 Pro Max

Diode laser output power 20W (note that this is light energy not electrical energy)

Laser focus 0.08x0.1mm

Laser wavelength 455±5nm

Focusing method fixed focus column + sliding device

Laser protection cover Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.

Engraving accuracy 0.005mm

Engraving area size the standard version is 370*360mm, which can be expanded to 900x370mm or 900x890mm

Machine power about 120W

Air pump Type mainboard-controlled air pump, voltage 24V, flow 30L/min

Air hose inner 7.5mm

Motherboard 32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function. (Upgrade Kit sold separately)

Engraving material all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone

Cutting material all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards

OperZating software LightBurn (with air assist function M8), LaserGRBL, LightBurn,support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.

Data transmission method USB connection or Bluetooth wireless connection

Power Input 24V 5A

Packing weight 7.53kg

Packing size 62.3*24*22.5cm

Certification CE FCC RoHS FDA ICE certification

LaserPecker LP5

Specifications

• Laser Configuration:

o 20 W 450 nm Blue Diode • 20 W 1064 nm Fiber Laser

• Working Area:

o 120 × 160 mm (ellipse)

o 100 × 100 mm (square)

o Extends to 160 × 300 mm with optional Slide Extension

• Laser Spot Size:

o Diode: 0.08 × 0.10 mm

o Fiber: 0.06 × 0.06 mm

• Speed & Precision:

o Up to 10,000 mm/s engraving speed

o Position accuracy down to 0.0027 mm

• Materials Supported:

o Fiber laser: metals (stainless steel, aluminum, brass, silver, titanium…)

o Diode laser: wood, acrylic, leather, glass, stone, food, etc.

o Can cut wood (~15 mm), dark acrylic (~15 mm), and thin metals (~1 mm)

Physical & Connectivity Details

• Dimensions & Weight:

• Laser Unit: 255 × 98 × 183 mm, 3.36 kg

• Electric Stand: 198 × 286 × 323 mm, 2.28 kg

• Conical Cover: 167 × 231 × 160 mm, 0.38 kg

• Total combined weight: ~6.02 kg

• Power Input: 24 V 7.5 A / AC 100–240 V, 180 W consumption

• Cooling: Combined semiconductor and air cooling

• File Formats: Supports G-code, JPG, PNG, BMP, SVG, DXF (PC); G-code, JPG, PNG, SVG (mobile)

• Connectivity: USB + Wi Fi; compatible with Windows, macOS, iOS, Android, and LightBurn

 

Safety & Features

• Fully compliant with CE/ROHS/FCC/FDA/NCC/KC/UKCA/TELEC/SRRC certifications

• Safety features: enclosure with door sensors, light filtration blocking 99.99%, exhaust fan, emergency stop, overheat protection

• Smart workflows: built in camera for auto material recognition and smart filling; live preview with dual red dot alignment

 

Bundles & Extension Options

• Standard Bundle: comes with conical cover and electric stand; allows handheld use and supports slide/rotary extensions for up to 160 × 300 mm workspace

• Safeguard Bundle: includes fully enclosed safety enclosure with camera, but workspace limited to 120 × 160 mm; not compatible with slide extension

The World's First Dual-laser Engraver for Almost All Materials

● The world's first portable dual-laser for almost all materials.

● Unmatched portability & functionality with a larger engraving area.

● Easy to use multifunction, smart touchscreen.

● The most accurate, powerful & fastest laserpecker ever.

Specifications

Laser Type 10W 450nm Blue Diode Laser

2W 1064nm Infrared Laser

Working Area 160mm x 120mm ( Standard)

160mm x 300mm (with Slide Extension Accessory)

Engraving Speed 4000mm/s

Preview Speed 16000mm/s

Movement Accuracy 0,0019mm

Resolution 1K/2K/4K/8K

Applicable

Materials 10W 450nm Blue Diode Laser:

Lacquered metal, Anodized aluminum, 304 stainless steel, Bamboo, Wood, Leather, Food, Paper, Fabric, Photosensitive printing, Plastic, Acrylic, Tinted glass, Color glaze ceramics, etc.

2W 1064nm Infrared Laser:

Metal, Plastic, Leather and any material with paint coating

Cutting Depth 8mm Balsa Wood, 5mm Dark Opaque Acrylic

Preview Mode Rectangle Preview/Outline Preview/Center Point Preview

Software LaserPecker Design Space & LightBurn

File Formats Mobile APP: JPG/PNG/G-Code/SVG

PC Software: G-Code/JPG/PNG/SVG/DXF usw. Vector Format

Connection Mobile: Wireless Bluetooth 5.0

PC: USB Connection / Wireless Bluetooth 5.0 (Dongle Required)

Operating System Mobile: iOS 9.0+ & Android 7.0+

PC: macOS 10+ und Windows 10+

System Language English, German, Spanish, French, Japanese, Korean, Simplified Chinese, Traditional Chinese

Technical Specifications Category Details Processing Capacity Laser Type 15W Diode Laser + 5W 1064nm Infrared Laser Processing Modes Laser Engraving / Laser Cutting Max. Working Speed 236.22 ips (6000 mm/s) Max. Laser Cutting Capacity (Basswood) 0.59" (15 mm) – Multiple Pass Max. Laser Cutting Capacity (Acrylic) 0.47" (12 mm) – Multiple Pass Working Area & Dimensions Parameter Specification Standard Working Area 4.53" × 4.53" (115 mm × 115 mm) Working Area with Extension 15.75" × 4.53" (400 mm × 115 mm) Max. Processing Height 4.72" (120 mm) Max. Rotary Engraving Diameter 4.72" (120 mm) Product Dimensions (L×W×H) 6.89" × 9.33" × 13.15" (175 mm × 237 mm × 334 mm) Product Weight 10.58 lb (4.8 kg) Material Compatibility Laser Type Cuttable Materials Engravable Materials 15W Diode Laser Paper, Wood, Leather, MDF, Felt, Some Dark Opaque Acrylic Paper, Wood, Leather, Coated Metal, Some Dark Opaque Acrylic, etc. 5W Infrared Laser (1064nm) — Plastic, Gold, Silver, Platinum, Stainless Steel, etc. Software & Connectivity Supported Software xTool Creative Space / xTool Studio / Atomm Operating System Windows / macOS Connection Methods Wi-Fi / USB / IP Supported File Formats SVG, DXF, JPG, JPEG, PNG, BMP, etc. AI Make Compatibility Yes Operation & Usability Feature Description Pre-assembled Yes Built-in Camera 50 MP Smart Camera Positioning Method Camera Positioning Focus Mode Auto Focus / Manual Focus (Two-dot Alignment) Framing Mode Rectangle Framing / Outline Framing Preview Method Smart Camera Preview / High-speed Light Live Preview Precision & Accuracy Parameter Specification Laser Spot Size (15W Diode) 0.00315" × 0.00236" (0.08 mm × 0.06 mm) Laser Spot Size (5W Infrared) 0.00118" × 0.00118" (0.03 mm × 0.03 mm) Motion Accuracy 0.000078" (0.00199 mm) ⚡ Power & Safety Parameter Specification Max. Machine Input Power 24V 6.0A (150W) Power Adapter Input Voltage 100–120V AC, 50/60Hz Safety Certification Class 4 Laser Safety  

• Multiple Units: The pressure unit of the tire pressure monitor system supports bar and Psi, and the temperature unit supports ℃ and ℉.
• Easy to install: The product is very easy to install and can be easily assembled without complicated tools saving you time and effort.
• Including 8 Sensors: This kit includes 8pcs external sensors, tire pressure and tire temperature of 4, 6, 8 wheels can be simultaneously displayed.
• Quality materials: professional tyre pressure monitoring system designed with LCD display, high volume alarm, long reception distance and stable signal.
• Applicable Models: Tire pressure monitoring system has wide applications, suitable for all kinds of trucks, RVs, motor home, travel trailer, and so on.

Specification:
Item Type: Tire Pressure Monitoring System
Material: ABS, Pure copper
Receiver Parameters:
Receiving Frequency: 433.92MHz
Power Supply Mode: USB Power Supply, Solar Power Supply
Working Voltage: DC 5V
Pressure Unit: Bar and Psi
Temperature Unit: ℃ and ℉
Operating Temperature: - 20-85 ℃
Storage Temperature: - 40-125 ℃
Tire Pressure Monitor Parameters:
Transmission Frequency: 433.92MHz
Pressure Range: 1.0-6 bar, 0-15 bar
Default Low Pressure Alarm Value: 2.8-6 bar, 3-13 bar
Default High Pressure Alarm Value: 6 bar, 15 bar
Pressure Accuracy: ± 0.1 Bar, ± 1.5 Psi
Working Voltage: DC+2.0-3.6V
Operating Temperature: - 20-85 ℃
Storage Temperature: - 40-125 ℃
Waterproof Grade: IP67
Battery: 8pcs CR1632 button batteries 120mAh 3.0V (built in battery)
Display Battery: 1 polymer lithium battery 400mAh 3.7V (built in battery)
Battery Life: 1.5-2 years typical value

packing list:
1 x RV Tire Pressure Monitor
8/10/12/14/16 x Sensor
8/10/12/14/16 x Anti Theft Nut
1 x Non Slip Mat
1 x USB Cable
1 x Wrench
1 x Instructions
1 x Bracket

Real Time Truck Tyre Sensor TPMS GPS Tracking T-Box Receiver  - Safety Monitoring: pressure, temperature status, acousto-optic telegraph- Real-time upload data: pressure, temperature, wear, speed, etc.- Multiple monitoring methods & real-time notification: View through App, computer application.- Alarm history data storageProducts Description Sensor Specification: 32.0*32.0*16.0mm Operating Temperature: -40 °C-- +125 °C Inspecting Temperature Range: -40 °C-- +125 °C Working Pressure: 2.1V-3.6V Communication: Bluetooth 5.0 Pressure Monitoring range: 100Kpa - 1400Kpa Pressure accuracy: ±10Kpa (100Kpa-1000Kpa) Temperature accuracy: ±2.8 °C(-40℃ - 10℃) Transmission Power: 2.4GHz RV TPMS Truck Trailer 4g Truck TPMS GPS Tire Pressure Monitoring System- Safety Monitoring: pressure, temperature status, acousto-optic telegraph- Real-time upload data: load, pressure, temperature, wear, speed, etc.- Multiple monitoring methods & real-time notification: View through App, computer or WeChat.- Alarm history data storageProducts Description Sensor Specification: 32.0*32.0*16.0mm Operating Temperature: -40 °C-- +125 °C Inspecting Temperature Range: -40 °C-- +125 °C Working Pressure: 2.1V-3.6V Frequency: 433.92MHz Pressure Monitoring range: 100Kpa - 1400Kpa Pressure accuracy: ±10Kpa (100Kpa-1000Kpa) Temperature accuracy: ±2.8 °C(-40℃ - 10℃) Transmission Power: 2.4GHz

B4 30/20/50/100W Fiber Laser Engraver

Specifications

Based on manufacturer listings and reviews

• Laser Source: 30/20/50/100w W Raycus fiber laser, 1064 nm wavelength

• Power Range: 20–60 kHz adjustable

• Marking Speed: Up to 15,000 mm/s (galvo-style)

• Minimum Line Width (Spot Size): 0.01 × 0.01 mm

• Engraving Depth: 0.1 – 0.5 mm (max ~0.3 mm typical)

• Work Area: 110 × 110 mm lens & 200 × 200 mm lens (included)

• Dimensions / Weight:≈71×25×25 cm, ~20 kg (≈44 lb)

• Power Supply: AC 110 V–220 V (variant dependent)

 

Included Accessories

Typically packaged

• 2 field lenses (110 mm & 200 mm)

• Rotary axis + D80 chuck

• Foot switch, positioning jig, material plates

• USB & data cables, ruler, allen keys

• Safety goggles (1064 nm)

• Software support (EzCad2 & LightBurn)

 

Features & Usability

•Galvo-head design offers ultra-fast marking with no moving gantry

•Handheld or desktop use via detachable stand and rotation arm

•Precision control through height adjustment (semi-automatic focus)

•Safety features: Emergency stop, auto-shutdown if tilted/moved

Materials Supported

Engraves a wide range of metals and coated:

•Stainless steel, aluminum, brass, gold, silver, alloys

•Also works on painted metals and non-transparent plastics (after prep

Summary Table

Feature Specification

Laser Power 30 W (Raycus)

Wavelength 1064 nm

Line Width ≤ 0.01 mm

Engraving Depth Up to ~0.5 mm (max ~0.3 mm real-world)

Speed ≤ 15,000 mm/s

Work Area 110×110 & 200×200 mm

Weight & Size ~20 kg; 71×25×25 cm

Software LightBurn, EzCad2

Power Supply 110 – 220 V AC

Star Light Night VisionBesides of excellent day image quality, camera also has very excellent night vision image quality. Wireless WiFi Transmission
Suitable For Most of Vehicles
Support Android & iOS Platform
WiFi Camera Configuration
Install Many of Cameras In A Vehicle
H.265+ Compression FormatA. Camera use H.265+ compression technology, that can save about 50% comparing with common H.265, and save about 75% comparing with H.264, so it can save over half of storage than traditional technology. B. Support to adjust frame numbers, so it can save more bite rate and enhance streamling live, and reduce storage cost. C. Under 32GB memory card and 1080P resolution, camera's memory card can save 7day*24hours of videos. If use 128GB memory card, it can save almost 30days of videos. D. When play H.265+ video files in computer, it need to use our special media player to transform its format to be MP4 or AVI format at first. Several Level Resolution For SelectionA. Provide resolution 1080P, 1440P, 1944P levels for selection. B. Support two stream that help to enhance playing speed. Main stream is for watch inl live and storage, sub-stream is for watch in live. C. Can adjust frame rate from 1 to 25 frames, and use H.265X format. Under mode of 32GB memory card and 1080P resolution, the 32GB memory card can save up to 7days*24hours of files, so it can reduce a lot of storage and cost. D. Support max 6 persion to watch in live or operations at the same time.  Support connect different camera and numbers at the same timeA. One host unit can connect max 12 cameras. Camera types include anti-water truck camera, dual lens camera, 360 degree panoramic camera, hidden camera, etc. B. Camera also support WiFi to connect network or phone, so it can work a WiFi dashcam independantly, or connect host unit or network to be a 4G dashcam. 24 Hours MonitoringSupport 24 hours working and recording even you turn off and leave the car.Loop RecordingSupport loop recording and no need to worry the lost of important videoWDR TechnologyCreates clear videos with artistic qualities even in backlight or low-light situations.Camera Angle Support 170 Degree & 360 Degree PanoramicA. Camera has two types of angle for selection: 170° and 360°. 170° usually use for front view, 360° panoramic type is for special application scenario that one lens can replace several lens. B.

55 W CO₂ Laser Cutter & Engraver

Technical Specifications

• Laser Power: 55 W CO₂ glass laser tube, ~10,000 h lifespan

• Classification: Class I, FDA certified enclosure

• Work Area:

• Bed size: 510 × 300 mm (20.08″ × 11.8″)

• Max material height: 51 mm (without tray)

• Rotary Module:

• Diameter: 10–180 mm (with risers)

• Engraving length: ≤ 245 mm

• Precision & Speed:

• Positioning precision: 0.001″ (0.025 mm)

• Maximum engraving speed: 600 mm/s

• Noise rating: ≤ 70 dB

• Cutting Capability:

• Basswood cutting depth: ~20–25 mm

• Camera & Autofocus:

• 5 MP ultra wide angle camera, visible area ~19.3″ × 11.4″

• AI-assisted visual positioning with ≤ 2 mm accuracy

• Full AI autofocus modes: material recognition, AI visual focus, material setup

• Cooling & Ventilation:

• Built-in water chiller, internal air compressor, exhaust fans (≤ 70 dB)

• Software & Connectivity:

• Compatible with GweikeCloud (web and offline) and LightBurn

• Connectivity: Wi Fi, USB, Ethernet

• File formats: SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, plus AI, PDF, PLT via LightBurn

• Power Requirements:

• 110–220 V ± 10%, 50–60 Hz

• Power consumption: ~550 W (excluding fans)

• Dimensions & Weight:

• Machine dimensions: 970 × 565 × 234.5 mm (38.2″ × 22.2″ × 9.2″)

• Weight: ~42.6–45.6 kg

Included Accessories

• Rotary roller attachment

• Honeycomb cutting tray

• Built-in water chiller, air compressor, exhaust system

• Dual internal LED lighting

• Starter material pack (basswood, acrylic, cardboard, MDF)

• Standard cables and consumables: USB & Ethernet, power cord, smoke pipes, clamps, hex tools, fuses, oil can, level meter, user manual

Feature Comparison Highlights

Feature 55 W Model 50 W Model (for contrast)

Laser Power 55 W CO₂ (glass tube) 50 W (similar specs otherwise)

Cutting Depth 20–25 mm (basswood) ~20 mm

Rotary Diameter 10–180 mm (w/ risers) 30–74 mm

Warranty Typically 1–2 years depending vendor Often 1 year

These models share most features—camera, autofocus, speed, software and connectivity—though the 55 W version offers slightly deeper cutting (up to 25 mm) and a broader rotary range

Summary

The 55 W Gweike Cloud Pro II is a powerful, feature-rich desktop CO₂ laser cutter/engraver with:

• High power & precision, enabling deeper cuts and faster engraving

• Rotary module for cylinders up to 180 mm diameter

• AI camera and autofocus for accurate job placement

• Multiple control options including cloud/web, offline, and LightBurn

• Robust integrated cooling and ventilation

TOPDON TC002C Duo Thermal Camera:

Specifications

• Spectral Range: 8–14 μm

• Thermal Resolution: 256 × 192 pixels (with integrated Super Resolution TISR upscaling to 512 × 384)

• Pixel Size: 12 μm

• NETD (Thermal Sensitivity): ≤ 40 mK at 25 °C, F#1.0, 25 Hz

• Frame Rate: 25 Hz

 

Temperature Range & Accuracy

• Measuring Range:

o Normal: –20 °C to 150 °C (–4 °F to 302 °F)

o High: 150 °C to 550 °C (302 °F to 1022 °F)

• Accuracy: ±2 °C or ±2% of reading; for temperatures under 100 °C, accuracy tightens to ±1 °C (±1.8 °F)

 

Physical & Power Details

• Weight: Approx. 30 g (1.05 oz)

• Dimensions: ~71 × 42 × 14 mm (2.8 × 1.65 × 0.55 in)

• Power Consumption: ~0.35 W (powered directly via device)

• Battery Life via Host Device: ~6–8 hrs on iPhone, ~8–10 hrs on iPad

 

Included Accessories

• TC002C thermal imager

• 50 cm USB C extension cable

• USB C to Lightning cable

• Carrying pouch (EVA)

• Cleaning cloth

• Quick start guide

• Packaging box

 

Software & Usage Features

• Works with TopInfrared app (requires iOS 12+), offering:

o Measurement modes: Point, Line, and Surface

o Multiple color palettes & live waveform display

o Customizable temperature thresholds

o Photo and video recording, image fusion (thermal + visual) support mentioned

 

Summary Table

Feature Specification

Thermal Resolution 256×192 → 512×384 (with TISR)

Sensitivity (NETD) ≤ 40 mK @25 °C, 25 Hz

Frame Rate 25 Hz

Temp Range –20 °C to 550 °C (–4 °F to 1022 °F)

Accuracy ±2 °C or 2% (±1 °C under 100 °C)

Weight & Size 30 g, 71×42×14 mm

Power Use Powered by host (~0.35 W)

Runtime 6–8 hrs (iPhone), 8–10 hrs (iPad)

Connectivity USB C (iPhone 15/16 & USB C iPads); not for Android/Mac

App Features Measurement modes, palettes, graphs, video/photo, TISR, image fusion

In Box Accessories USB C cable, Lightning cable, pouch, cloth, guide

Products Description

S9 5.5W

Specification

Product model SCULPFUN S9/ S9 Pro

Engraving size 410*415mm

Engraving materials wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, 304 Stainless steel, ceramic，dark stone

Cutting material wood, acrylic, cardboard, fabric, bamboo, plastic board, KT board

Laser effect power 90W (cutting effect compared to 90W CO2 laser)

Machine Electricity Power 30W (It has nothing to do with cutting or engraving performance,just electricity consumes)

Diode laser power 5.5-6W (Please note that this is light energy and not electric energy)

Laser wave length 450±5nm

Engraving accuracy 0.01mm

Focusing method fixed focus laser + sliding device

Laser protective cover The light filter cover on the laser protects the user's eyes and prevents animals grabing the laser spot.

Operating software LaserGRBL, LightBurn, LaserGRBL, LightBurn, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.

Data transmission method USB connection

Power supply International universal standard

Power input 12V 5A

Equipment net weight 3.0kg

Package weight 4.4kg

Packing size 615*345*130mm

Certification CE FCC RoHS FDA IEC